• www.jetbox.aero

    www.jetbox.aero

Maintenance Update

img_0457_1.jpgWell G-EWAW is getting a good rest and a thorough maintenance check. PDG have had my machine since last Monday and are performing a 100hr and 300hr check on her. The compressor was also due an inspection so that will get done too. I also had a short list of items that required attention which I hope they will get the chance to do, if the weather has anything to do with it, then I suspect they will have it into early January! I am in fact quite happy that G-EWAW is down at PDG because it

The odds and sods were nothing of significance, but included connecting a TOT reset key that had never been working, replacing the backlight bulbs on my VOR. N1 gauge and the compass so they can all be seen at night. We had also found that the throttle had become very stiff so they are replacing the throttle cable and also the collective had become ‘notchy’ and made it difficult to operate in a precise manner. On inspection of the main rotor head, PDG identified, some wear in a component on the swash plate and they were certain this was the cause of the problem on the collective , so that has been removed and is being sent to Sloane Helicopters for attention. They are all doing their best to have it returned prior to Xmas so that I can have it back during the New Year period, but to be honest I’m not holding my breath.

A major consideration for this inspection is the starts which have become very poor. I have previously written about these having a tendency to be very warm and although we changed the FCU (a scheduled change), replaced the starter generator and one or two other things, they have become poor again. So much so that it was becoming impossible to fire the machine without using a ground power unit in conjunction with the internal battery. A procedure that isn’t recomended but was necessary in the last few weeks to get her going.

The correction of this problem was to be number 1 priority on the list of things to do and the boys at PDG have concluded that my battery is actually the problem. This is slightly disappointing as I only had it fitted in March and is therefore less than 6 months old. I purchased it directly from the supplier and had it shipped to PDG for installation so I will have to deal with that element on my return although a new one is being ordered prior to my return to the UK.

Other items are unlikely to get done including a pre-flight kit that I bought in January and mainly provides for the installation of flight steps on the outside of the machine to stop me having to stand on the seats to conduct my pre-flight. They will get fitted eventually I guess. So that’s he update so far. I’ll keep you posted.

Advertisements

Moved – www.jetbox.aero

I have now migrated to my new site at www.jetbox.aero

Please visit and bookmark this new address for all future updates.